Skip to content
Documentation

Allocating IPs in server only mode

Since 7.0.4

To enable the system to allocate IPs, follow these steps:

  1. Fabric > my Fabric > Configuration > Enable Server only operation.
  2. For each server’s interface, Servers > my server > Interfaces, select the fabric.
  3. If bonding is required, select the same redundancy index on the interfaces that are in the same bond. This will instruct the system to select the correct interfaces when it needs to implement redundancy.
  4. Set the fabric to Active.
  5. Create subnets, logical networks, and/or network profiles as needed.